Working with Cash Control Unit
Connecting and Disconnecting Cash Control Unit
User Manual Cash Control Unit 1.0/Edition 12.2009
17 of 27
ID No. 30033908
4. Connect the provided power cable to Cash Control Unit’s power sup-
ply port.
Fig. 14
Cables connected to Cash Control Unit
5. Wait until the green LED stops blinking. This can take about 30 sec-
onds.
Cash Control Unit is ready for use.
Disconnecting Cash
Control Unit
Do not disconnect Cash Control Unit from power supply if not necessary.
Make sure no data transfer is in progress before you disconnect Cash
Control Unit.
To disconnect Cash Control Unit from the ECR
1. Shut off the electronic cash register to ensure no operations that
might affect Cash Control Unit are in progress.
2. Disconnect Cash Control Unit from the power supply.
3. Disconnect the RS232 data cable from the ECR.