RoadLED 50m
Page 12 / 20
Created
23.04.2021
rasa
Modified
06.10.2021
rasa
Object-ID
2214657
3. Dismantle the electronics
Loose the 2 screws with a Torx T6 screwdriver
and remove the electronics.
4. Remove the electronics
Remove the electronics. Consider the ESD pro-
tection measures.
5. Transfer the DIP switch settings
Transfer the DIP switch from the old module to
the new module
If a switch is moved to the right, the respective
address is interpreted as 0. If a switch is moved
to the left, the respective address is interpreted
as 1.
If a configuration is no longer recognisable, the
setting can be taken from the following table
The light module with address 1 is located at
the beginning of the cable reel. The light mo-
dule with address 16 is located at the end of the
cable.
Example: The address of the light module
should be set to address 15. According to the
table in section 6. DIP switch no. 1, 2, 3 and 4
must be in position 1 and DIP switch no. 5 in
position 0.
Adresse RoadLED
Position DIP-
Switch
DIP Switch Nr.
5 4 3 2 1
Adresse 1
0 0 0 0 0
Adresse 2
0 0 0 0 1
Adresse 3
0 0 0 1 0
Adresse 4
0 0 0 1 1
Adresse 5
0 0 1 0 0
Adresse 6
0 0 1 0 1
Adresse 7
0 0 1 1 0
Adresse 8
0 0 1 1 1
Adresse 9
0 1 0 0 0
Adresse 10
0 1 0 0 1
Adresse 11
0 1 0 1 0
Adresse 12
0 1 0 1 1
Adresse 13
0 1 1 0 0
Adresse 14
0 1 1 0 1
Adresse 15
0 1 1 1 0
Adresse 16
0 1 1 1 1
