LaneLED INOX42
Page 3 / 22
Created
22.03.2017
roen
Modified
11.07.2018
roen
Object-ID
845816
1 General information
1.1 Marking concept for hazards and hints
Hazard
Hazardous situation which will cause serious injury or even death if it is not prevented.
Caution
Hazardous situation which could cause slight to moderate injury if it is not prevented.
Hint
Indicates information which does not concern personal injury, e.g. hints in respect of material damage.
Protective measures
Increase safety by applying a protective measure.
1.2 Responsibilities of the operator
-
Make sure that this document is always kept in a safe place in a legible form together with the product.
-
Read these instructions carefully before first start-up of the product.
-
This product has been developed and produced exclusively for the use indicated in these documents.
Every other use, which is not mentioned explicitly, could affect the intactness of the product and/or could
constitute a source of danger.
-
The manufacturer rejects any liability for damage which has been caused by incorrect or non-intended use
of the product.
-
In countries, which do not belong to the European Community, the national legal reference regulations as
well as the standards and regulations applicable in these countries have to be observed for warranty of a
corresponding safety level.
-
The installation has to be carried out according to the applicable regulations.
-
The manufacturer assumes no liability for inexpert execution of installation as well as deformations which
may occur during operation.
-
The electric power supply has to be switched off before executing any action on the installation.
-
Exclusively original parts of the manufacturer shall be used for maintenance. Maintenance work may be
carried out by qualified staff only.
-
All procedures which are not explicitly mentioned by the manufacturer in the instructions are not permitted.
-
The packing material must not be stored within the reach of children as it could be a potential source of
danger.
