- 77 -
Configuring a RAID Set
Step 5:
Enter the array capacity and press <Enter>. Finally press <Enter> on the
Create Volume
item to begin creating
the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm or <N> to
cancel (Figure 17).
When completed, you can see detailed information about the RAID array in the
DISK/VOLUME INFORMATION
section, including the RAID level, stripe block size, array name, and array capacity, etc. (Figure 18)
To exit the RAID BIOS utility, press <Esc> or select
6. Exit
in
MAIN MENU
.
Now, you can proceed to install the SATA RAID/AHCI driver and operating system.
Figure 17
Figure 18
Intel(R) Rapid Storage Technology - Option ROM - 15.2.0.2649
Copyright(C) Intel Corporation. All Rights Reserved.
Press ENTER to create the specified volume.
[
hi
]-Change
[TAB]-Next
[ESC]-Previous Menu
[ENTER]-Select
[ HELP ]
Name : Volume0
RAID Level : RAID0(Stripe)
Disks :
Select Disks
Strip Size : 128 MB
Capacity : 931.5 GB
Sync : N/A
Create Volume
[ CREATE VOLUME MENU ]
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N) :
Intel(R) Rapid Storage Technology - Option ROM - 15.2.0.2649
Copyright (C) Intel Corporation. All Rights Reserved.
RAID Volumes :
ID
Name
Level
Strip
Size
Status
Bootable
0
Volume0
RAID0(Stripe)
128KB
931.5GB
Normal
Yes
Physical Devices :
ID
Device Model
Serial #
Size
Type/Status(Vol ID)
1
Hitachi HDS72105
JP1532FR3BWV7K
465.7GB
Member Disk(0)
2
Hitachi HDS72105
JP1532ER046M2K
465.7GB
Member Disk(0)
[
hi
]-Select
[ESC]-Exit
[ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
