Getting Started
To remove the memory card
1. For safe removal, tap Application Drawer > APPS tab > Settings > Storage > Unmount SD
card.
2. Slide out the memory card from the slot.
1.3 Charging the Battery
When you take your phone out of box for the first time, the battery isn’t at full of power. Please
charge the battery fully before using.
1. Connect the USB cable to the AC adapter, and then, connect to the device via the USB
cable.
2. Plug the AC adapter to a socket to start the charge.
NOTE:
To ensure safety, do not remove the battery from the phone while the AC adapter is
connected or while it is being charged.
1.4 Turning the Phone On or Off
After installing the SIM card and charging the battery, you are now ready to turn your phone
on.
To turn on your phone
Press and hold the power button until the phone shortly vibrates.
To turn off your phone
1. Press and hold the power button for several seconds.
2. A pop-up window appears, then tap “Power off”.
3. Select “OK” to confirm.
To set your phone to the sleep mode
To set your phone to the sleep mode, press the power button briefly. It will turn the display off.
To turn the display on, press the power button briefly again.
1.5 Lock/Unlock
There are four functions you may use when turning the device on or coming back from sleep
mode.
Simba SX1
|
1-4