background image

 

&

Media detect count

 

Allows you to set the number of times to check the presence of media. This item is configurable only when 

Network Stack

 is enabled. (Default: 1)

 

ƒ

NVMe Configuration

 

Displays information on your PCIe SSD if installed.

 

ƒ

SATA And RST Configuration

 

&

SATA Controller(s) 

 

Enables or disables the integrated SATA controllers. (Default: Enabled)

 

&

SATA Mode Selection 

 

Displays the operating mode of the integrated SATA controllers. Advanced Host Controller Interface (AHCI) 

is an interface specification that allows the storage driver to enable advanced Serial ATA features such as 

Native Command Queuing and hot plug.

 

&

Aggressive LPM Support

 

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset 

SATA controllers. (Default: Disabled)

 

&

Port 0/1/2/3

 

Enables or disables each SATA port. (Default: Enabled)

 

&

SATA Port 0/1/2/3 DevSlp

 

Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)

 

&

Hot plug

 

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

 

&

Configured as eSATA

 

Enables or disables support for external SATA devices.

 

ƒ

Realtek PCIe GBE Family Controller

 

This sub-menu provides information on LAN configuration and related configuration options.

 

ƒ

Miscellaneous

 

&

LEDs in System Power On State

 

Allows you to enable or disable motherboard LED lighting when the system is on.

 

Off   

Disables the selected lighting mode when the system is on.

 

On   

Enables the selected lighting mode when the system is on. (Default)

 

&

Intel Platform Trust Technology (PTT)

 

Enables or disables Intel

®

 PTT Technology. (Default: Disabled)

 

&

3DMark01 Enhancement

 

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

 

&

CPU PCIe Link Speed

 

Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or 

Gen 4 

(Note)

. Actual operation mode is subject to the hardware specification of each slot. 

Auto

 lets the BIOS 

automatically configure this setting. (Default: Auto)

 

&

PCH PCIe Link Speed

 

Allows you to set the operation mode of the Chipset-controlled PCI Express slots to Gen 1, Gen 2, or 

Gen 3. Actual operation mode is subject to the hardware specification of each slot. 

Auto

 lets the BIOS 

automatically configure this setting. (Default: Auto)

 

&

VT-d

 

Enables or disables Intel

®

 Virtualization Technology for Directed I/O. (Default: Enabled)

- 31 -

Summary of Contents for H510M S2H V2









































Reviews: