background image

Regulatory Notices

United States of America, Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate 

radio frequency energy and, if not installed and used in accordance with 

manufacturer's instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will 

not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment to an outlet on a circuit different from that to 

which the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio 

noise emissions from digital apparatus set out in the Radio Interference 

Regulations of the Canadian Department of Communications. This class 

B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-

003 du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with the following directives: Electromagnetic 

Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/

EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. 

This product has been tested and found to comply with all essential 

requirements of the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU & the 

European Commission Delegated Directive (EU) 2015/863 Statement

GIGABYTE products have not intended to add and safe from hazardous 

substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). 

The parts and components have been carefully selected to meet RoHS 

requirement. Moreover, we at GIGABYTE are continuing our efforts to 

develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic 

Equipment (WEEE) Directive Statement

GIGABYTE will fulfill the national laws as interpreted from the 2012/19/

EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. 

The WEEE Directive specifies the treatment, collection, recycling and 

disposal of electric and electronic devices and their components. Under 

the Directive, used equipment must be marked, collected separately, and 

disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its 

packaging, which indicates that this product must not be 

disposed of with other waste. Instead, the device should be 

taken to the waste collection centers for activation of the 

treatment, collection, recycling and disposal procedure. 

For more information about where you can drop off your waste equipment 

for recycling, please contact your local government office, your household 

waste disposal service or where you purchased the product for details of 

environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its packaging, 

which indicates that this product must not be disposed of with 

other waste. Instead, the device should be taken to the waste 

collection centers for activation of the treatment, collection, 

recycling and disposal procedure.

Déclaration de Conformité aux Directives de l'Union européenne (UE)

Cet appareil portant la marque CE est conforme aux directives de l'UE 

suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive 

Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE. La conformité 

à ces directives est évaluée sur la base des normes européennes 

harmonisées applicables. 

European Union (EU) CE-Konformitätserklärung

Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: 

EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU und 

RoHS-Richtlinie 2011/65/EU erfüllt. Die Konformität mit diesen Richtlinien 

wird unter Verwendung der entsprechenden Standards zurEuropäischen 

Normierung beurteilt.

CE declaração de conformidade

Este produto com a marcação CE estão em conformidade com das 

seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM 

2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas diretivas 

é verificada utilizando as normas europeias harmonizadas.

CE Declaración de conformidad

Este producto que llevan la marca CE cumplen con las siguientes 

Directivas de la Unión Europea: Directiva EMC (2014/30/EU), Directiva 

de bajo voltaje (2014/35/EU), Directiva RoHS (recast) (2011/65/EU). 

El cumplimiento de estas directivas se evalúa mediante las normas 

europeas armonizadas.

Dichiarazione di conformità CE

Questo prodotto è conforme alle seguenti direttive: Direttiva sulla 

compatibilità elettromagnetica 2014/30/UE, Direttiva sulla bassa tensione 

2014/35/UE, Direttiva RoHS (rifusione) 2011/65/UE. Questo prodotto è 

stato testato e trovato conforme a tutti i requisiti essenziali delle Direttive.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Product Name: 

Motherboard

Trade Name: 

GIGABYTE

Model Number: 

H510M S2H V2

Responsible Party – U.S. Contact Information: 

G.B.T. Inc. 

Address: 17358 Railroad street, City Of Industry, CA91748

Tel.: 1-626-854-9338

Internet contact information: https://www.gigabyte.com 

FCC Compliance Statement: 

This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators. 

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this 

device must accept any interference received, including interference that may cause undesired operation.

- 39 -

Summary of Contents for H510M S2H V2









































Reviews: