background image

D.5. Downloading new application firmware 

The TR40xx’s internal firmware can be upgraded in the field via a so-called Application Download Port. 

We are constantly working on the TR40xx functionality enhancement, so a new firmware version is normally 
released every half year. You are advised to register at 

www.proxdata.com/register.htm

 so we can let you 

when the new improved firmware version is available. 

D.5.1. Obtaining the most recent firmware version 

New versions of the firmware developed by ProxData are posted at 

www.proxdata.com/downloads.htm

There is normally an accompanying history information specifying exactly what changes has been made to 
the new firmware compared to the previous releases. 

D.5.2. Checking currently loaded firmware version 

Before attempting to install a new firmware, always check the firmware that is currently loaded into your 

TR40xx. All firmware versions developed by the ProxData are assigned ascending version numbers. The 
TR40xx displays the version number of the currently loaded firmware at the startup. The Monitor

 

screen 

displayed for a couple of seconds after the power-up looks somewhat like this: 

MONITOR (v2.0) 
Starting app: 
TimeRec V3.30 
Please, wait... 

Third line in the screen above displays current firmware version (“TimeRec V3.30”). If 

www.proxdata.com

 offers a newer version of the firmware and you think that new features offered are useful 

to you, then you can upgrade your TR40xx. 

D.5.3. Downloading new firmware file 

The application file is downloaded onto the TR40xx using a special Download Cable, a standard Serial 

Cable (both included with every TR40xx), and a PC running any communications software supporting a 

Summary of Contents for TR4020


































































































































































Reviews: