2500A Menus
2500A Series Operation Manual, 34172 Revision C, March 2008
The following explains each item in the Language Menu 1 menu:
SCPI.
This menu item allows you to select Standard Commands for Programmable Instruments (SCPI)
as the language to be used by the instrument during remote operations. SCPI is one of the standard
remote language choices that are available. To choose SCPI as the remote language, select this menu
item.
GT12000.
This menu item allows you to select the Giga-tronics Series 12000A native command set as
the language to be used by the instrument during remote operations.
GT9000
. This menu item allows you to select GT 9000 command set as the remote control language to
be used by the instrument using the instrument's GPIB or RS-232 port.
GT7000
. This menu item allows you to select GT 7000 command set as the remote control language to
be used by the instrument using the instrument's GPIB or RS-232 port.
GT900.
This menu item allows you to select GT 900 command set as the remote control language to be
used by the instrument using the instrument's GPIB or RS-232 port
Language 2/2.
Pressing this softkey invokes Language Menu 2 in the display. See “Language Menu 2”,
below, for Language Menu 2 menu item descriptions.
2.3.8.2
Language Menu 2
The Language Menu 2 menu, as well as the Language Menu 1 menu, allow you to view and choose the
language to be used by the instrument during remote operation.
Figure 2-28 shows the Language Menu 2 menu:
Figure 2-28: Language Menu 2 with Interactive Softkeys
The following explains each item in the Language Menu 2 menu:
HP8340.
This menu item allows you to select HP 8340 command emulation as the language to be used
by the instrument during remote operations.The HP8340 language option must be installed in order to
access this menu item.
LANGUAGE MENU 2
HP8340
Language
3/3
Option not
installed
SCPI Selected
HP8350
HP8360
HP8370
HP8663
Option not
installed
Option not
installed
Option not
installed
Option not
installed
Summary of Contents for 2508A
Page 1: ...2500A Series 2500A Series Microwave Synthesizer Operations Manual 34172 Revision C March 2008 ...
Page 4: ......
Page 22: ...Chapter 1 2500A Introduction 22 2500A Series Operation Manual 34172 Revision C March 2008 ...
Page 88: ...2500A Chapter 3 Remote Operation 88 2500A Series Operation Manual 34172 Revision C March 2008 ...