13
English
4-6
Installation of 5.25” Front Device Bay
The installation of 5.25” CD-ROM is also intended for installation of general 5.25” front device bay.
Required tool: None
4-7
Installation of 3.5” Front Device Bay
The installation of 3.5” floppy disc drive intended for installation of general 3.5” front device bay
Required tool: None
4-6-1 Open the front panel, remove the 5.25” plastic drive
rail and internal metal panel.
4-6-2 Slide the 5.25” CD-ROM into the drive.
4-6-3 Refer to the installation order illustrated in the left
figure and secure the 5.25” CD-ROM by controlling
the latch (reverse steps for disassembly).
4-6-4 Installation
completed.
4-7-1 Same as Step 4-6-1.
4-7-2 Slide the 3.5” floppy disc drive into the drive bay.