background image

2-6 Settings

 

ƒ

Platform Power

 

&

Platform Power Management

 

Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)

 

&

PEG ASPM

 

Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is 

configurable only when 

Platform Power Management 

is set to 

Enabled

. (Default: Disabled)

 

&

PCH ASPM

 

Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item 

is configurable only when 

Platform Power Management 

is set to 

Enabled

. (Default: Disabled)

 

&

DMI ASPM

 

Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is 

configurable only when 

Platform Power Management 

is set to 

Enabled

. (Default: Disabled)

 

&

Power On By Keyboard

 

Allows the system to be turned on by a PS/2 keyboard wake-up event.

 

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

 

Disabled   

Disables this function. (Default)

 

Password   

Set a password with 1~5 characters to turn on the system.

 

Keyboard 98  Press POWER button on the Windows 98 keyboard to turn on the system.

 

Any Key   

Press any key to turn on the system.

 

&

Power On Password

 

Set the password when 

Power On By Keyboard

 is set to 

Password

.

 

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. 

To turn on the system, enter the password and press <Enter>.

 

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter> 

again without entering the password to clear the password settings.

 

&

Power On By Mouse

 

Allows the system to be turned on by a PS/2 mouse wake-up event.

 

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

 

Disabled   

Disables this function. (Default)

 

Move   

 

Move the mouse to turn on the system.

 

Double Click  Double click on left button on the mouse to turn on the system.

- 29 -

Summary of Contents for B560M DS3H PLUS











































Reviews: