Gigabyte B560M DS3H PLUS User Manual Download

Page: 36 / 42

VGA Support

Allows you to select which type of operating system to boot.

Auto

Enables legacy option ROM only.

EFI Driver

Enables EFI option ROM. (Default)

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

USB Support

Disable Link

All USB devices are disabled before the OS boot process completes.

Full Initial

All USB devices are functional in the operating system and during the POST.

(Default)

Partial Initial

Part of the USB devices are disabled before the OS boot process completes.

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

. This function is disabled

when

Fast Boot

is set to

Ultra Fast

PS2 Devices Support

Disable Link

All PS/2 devices are disabled before the OS boot process completes.

Enabled

All PS/2 devices are functional in the operating system and during the POST.

(Default)

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

. This function is disabled

when

Fast Boot

is set to

Ultra Fast

NetWork Stack Driver Support

Disable Link

Disables booting from the network. (Default)

Enabled

Enables booting from the network.

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

Next Boot After AC Power Loss

Normal Boot

Enables normal bootup upon the return of the AC power. (Default)

Fast Boot

Keeps the Fast Boot settings upon the return of the AC power.

This item is configurable only when

Fast Boot

is set to

Enabled

Ultra Fast

Mouse Speed

Allows you to set the mouse cursor movement speed. (Default: 1 X)

Windows 10 Features

Allows you to select the operating system to be installed. (Default: Windows 10)

CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Enabled

Enables UEFI CSM.

Disabled

Disables UEFI CSM and supports UEFI BIOS boot process only. (Default)

LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

This item is configurable only when

CSM Support

is set to

Enabled

Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Do not launch

Disables option ROM.

UEFI

Enables UEFI option ROM only.

Legacy

Enables legacy option ROM only. (Default)

This item is configurable only when

CSM Support

is set to

Enabled

- 36 -

Summary of Contents for B560M DS3H PLUS











































Search results

Summary of Contents for B560M DS3H PLUS

Reviews:

Related manuals for B560M DS3H PLUS

Brands by name

Popular brands

Gigabyte B560M DS3H PLUS, User Manual

Search results

Summary of Contents for B560M DS3H PLUS

Reviews:

Related manuals for B560M DS3H PLUS

Brands by name

Popular brands