- 84 -
BIOS Setup
5-3-1-2 Prefetcher Settings
Parameter
Description
Prefetcher settings
L1 Stream HW Prefetcher
Enable/Disable L1 Stream HW Prefetcher.
Options available: Auto, Enable, Disable. Default setting is
Enable
.
L1 Stride Prefetcher
Use memory access history of individual instructions to fetch additional lines
when each access is a constant distance from the previous.
Enable/Disable L1 Stride Prefetcher.
Options available: Auto, Enable, Disable. Default setting is
Auto
.
L1 Region Prefetcher
Use memory access history to fetch additional lines when the data access
for a given instruction tends to be followed by other data accesses.
Enable/Disable L1 Region Prefetcher.
Options available: Auto, Enable, Disable. Default setting is
Auto
.
L2 Stream HW Prefetcher
Enable/Disable L2 Stream HW Prefetcher.
Options available: Auto, Enable, Disable. Default setting is
Enable
.
L2 Up/Down Prefetcher
Use memory access history to determine whether to fetch the next or
previous line for all memory accesses.
Enable/Disable L2 Up/Down Prefetcher.
Options available: Auto, Enable, Disable. Default setting is
Auto
.
Summary of Contents for G492-ZL2
Page 1: ...G492 ZL2 HPC Server 4U DP SXM4 A100 8 GPU Server User Manual Rev 1 0 ...
Page 51: ...BIOS Setup 51 When Boot Mode Select is set to Legacy in the Boot Boot Mode Select section ...
Page 63: ...BIOS Setup 63 5 2 8 PCI Subsystem Settings ...
Page 74: ... 74 BIOS Setup 5 2 17 Intel R X710 Ethernet Controller ...