10
GA-8EGXDR-E(C) Motherboard
Step 1-2: CPU Installation
Pin1 indicator
CPU Top View
CPU Bottom View
1. Pull the lever out, than lift up the Lever.
2. Locate Pin 1 in the socket and look
for a (golden) cut edge on the CPU
upper corner. Then insert the CPU
into the socket.
3. Press down the CPU socket
lever and finish CPU installation.
M
Please make sure the CPU type is supported by the motherboard.
M
If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause
improper installation. Please change the insert orientation.
M
Warning: If your install one CPU ONLY, please refer to the Motherboard
Layout (page 7) to install the CPU 2 frist.
M
Note that if you insall two CPUs, please install the same speed CPUs.