- 22 -
Whether the system will work stably with the overclock/overvoltage settings you made is dependent
on your overall system configurations. Incorrectly doing overclock/overvoltage may result in dam
-
age to CPU, chipset, or memory and reduce the useful life of these components. This page is for
advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
(Note) This item is present only when you install a CPU that supports this feature.
Robust Graphics Booster
Robust Graphics Booster (R.G.B.) helps to enhance the performance of the graphics chip and memory.
Auto
allows the BIOS to automatically set the R.G.B. mode based on system configurations. Options
are: Auto (default), Fast, Turbo.
CPU Clock Ratio
(Note)
Allows you to alter the clock ratio for the installed CPU.
The item is present only when a CPU with unlocked clock ratio is installed.
Fine CPU Clock Ratio
(Note)
Allows you to increase clock ratio by 0.5 for the installed CPU.
The item is present only when a CPU with unlocked clock ratio is installed.
CPU Frequency
Displays the current operating CPU frequency.
******** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control
Enables or disables the control of CPU host clock.
Enabled
will allow the
CPU Host Frequency
item
below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds
to allow for automated system reboot, or clear the CMOS values to reset the board to default values.
(Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
x CAS Latency Time
9
Auto
x tRCD
9
Auto
x tRP
9
Auto
x tRAS
24
Auto
>>>>> Advanced Timing Control
Advanced Timing Control
[Press Enter]
******** Mother Board Voltage Control ********
Voltage Types
Normal
Current
-----------------------------------------------------------------------------
>>> CPU
CPU Vcore
1.30000V
[Auto]
CPU Termination
1.200V
[Auto]
>>> DRAM
DRAM Voltage
1.500V
[Auto]
