Gigabyte GA-H270-HD3, User Manual

&

AC BACK

Determines the state of the system after the return of power from an AC power loss.

Always Off  

 The system stays off upon the return of the AC power. (Default)

Always On  

The system is turned on upon the return of the AC power.

Memory   

The system returns to its last known awake state upon the return of the AC power.

&

Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled   

Disables this function. (Default)

Any Key   

Press any key to turn on the system.

Keyboard 98  Press POWER button on the Windows 98 keyboard to turn on the system.

Password   

Set a password with 1~5 characters to turn on the system.

&

Power On Password

Set the password when 

Power On By Keyboard

 is set to 

Password

.

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. 

To turn on the system, enter the password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter> 

again without entering the password to clear the password settings.

&

Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled   

Disables this function. (Default)

Move   

Move the mouse to turn on the system.

Double Click  Double click on left button on the mouse to turn on the system.

&

ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to 

Enabled

, the following functions will become unavailable: Resume by Alarm, 

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.

&

Soft-Off by PWR-BTTN

Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off   

Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power 

button is pressed for less than 4 seconds, the system will enter suspend mode.

&

Power Loading 

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing 

it to shutdown or fail. If this occurs, please set to 

Enabled

. 

Auto

 lets the BIOS automatically configure this 

setting. (Default: Auto)

&

Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled) 

If enabled, set the date and time as following:

Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the 

AC power, or the settings may not be effective.

&

RC6(Render Standby)

Allows you to determine whether to let the onboard graphics enter standby mode to decrease power 

consumption. (Default: Enabled)

- 35 -