Gigabyte GA-H81M-HD3, User Manual

- 30 -

&

Soft-Off by PWR-BTTN

Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off   

 Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec.   Press and hold the power button for 4 seconds to turn off the system. If the power 

button is pressed for less than 4 seconds, the system will enter suspend mode.

&

RC6(Render Standby)

Allows you to determine whether to let the onboard graphics enter standby mode to decrease power 

consumption. (Default: Disabled)

&

AC BACK

Determines the state of the system after the return of power from an AC power loss.

Memory   

 The system returns to its last known awake state upon the return of the AC power.

Always On  

 The system is turned on upon the return of the AC power.

Always Off  

 The system stays off upon the return of the AC power. (Default)

&

Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled   

 Disables this function. (Default)

Password   

 Set a password with 1~5 characters to turn on the system.

Keyboard 98   Press POWER button on the Windows 98 keyboard to turn on the system.

Any Key   

 Press any key to turn on the system.

&

Power On Password

Set the password when 

Power On By Keyboard

 is set to 

Password

.

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept. 

To turn on the system, enter the password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter> 

again without entering the password to clear the password settings.

&

Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled   

 Disables this function. (Default)

Move   

 Move the mouse to turn on the system.

Double Click   Double click on left button on the mouse to turn on the system.

&

ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to 

Enabled

, the following functions will become unavailable: Resume by Alarm, 

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.