GA-X38-DS5 Motherboard
- 54 -
English
System Voltage Control
Determines whether to manually set the system voltages.
Auto
lets BIOS automatically set the
system voltages as required.
Manual
allows all voltage control items below to be configurable.
(Default: Manual)
DDR2 OverVoltage Control
Allows you to to set memory voltage.
Normal
Supplies the memory voltage as required. (Default)
+0.05V ~ +1.55V
Increases memory voltage by 0.05V to 1.55V at 0.05V increment.
Note: Increasing memory voltage may result in damage to the memory.
PCI-E OverVoltage Control
Allows you to to set PCIe voltage.
Normal
Supplies the PCIe bus voltage as required. (Default)
+0.05V ~ +0.35V
Increases PCIe bus voltage by 0.05V to 0.35V at 0.05V increment.
FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal
Supplies the FSB voltage as required. (Default)
+0.05V ~ +0.35V
Increases FSB voltage by 0.05V to 0.35V at 0.05V increment.
(G)MCH OverVoltage Control
Allows you to set the North Bridge voltage.
Normal
Supplies the North Bridge voltage as required. (Default)
+0.025V ~ +0.375V Increases North Bridge voltage by 0.025V to 0.375V at 0.025V increment.
CPU Voltage Control
Allows you to set the CPU voltage.
Normal
sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
