28
3-2.“Link Status” Setting
“
Link Status”
tab shows you the current association information about the card’s
connection with a wireless network.
(see
Figure 3-9
)
Figure 3-9.
Link Status
Description of items in
Figure 3-9
is as follows:
Status:
Shows current link status. “No Link” will appear on the screen when no connection
is available. Otherwise, SSID and BSSID of a link will appear.
Current Channel:
The current channel number used by the WLAN card.
Link Speed:
Transmission rate (transferring and receiving) at which data is transferred
between Stations with WLAN Card and AP. The speed will adjust according to different
modes (802.11b, 11g or mixed) or distance.
Throughput:
displays the transmitting (Tx) and receiving (Rx) bytes per second.
Link Quality:
Measures quality of the link according to the quality of received AP signal.
Signal Strength:
Measures signal strength received by RF signal processor and displays
the signal strength in dBm.
Noise Level:
Noise level during connection.
Summary of Contents for GN-WS30N-RH
