GS-SR113 System Installation Guide
14
5.3. Heat Sink Installation
Step 1.
Put the Heat sink on the CPU.
Figure 8
Figure 9
Step 2.
Before putting the heat sink on the CPU, please well
remember to apply the thermal conductivity compound on the
CPU.
Step 3.
Seat the heat sink in the retention modules with the four
screws. (Fig-8)
Step 3.
Secure the heat sink firmly with two cooler brackets.
There are two dark mark printed on the heat sink. Align the center
of the cooler bracket to the dark mark and push it down (Fig-9).
Step 4.
Hook one end of the cooler bracket to the CPU socket as
shown in the
Fig-10
. Hook the other end of the cooler bracket by
gripping it to another side of retention module.
