BIOS Setup
- 92 -
Parameter
Description
SMEE
Controls the Secure Memory Encryption Enable (SMEE) function.
Options available: Disable, Enable, Auto. Default setting is
Auto
.
Action on BIST Failure
Action to take when a CCD BIST failure is detected.
Options available: Do nothing, Down-CCD, Auto. Default setting is
Auto
.
Enhanced REP MOVSB/
STOSB (ERMSB)
Options available: Disabled, Enabled, Auto. Default setting is
Auto
.
Log Transparent Errors
Enable/Disable the log Transparent errors function.
Options available: Auto, Disabled, Enabled. Default setting is
Auto
.
AVX512
Enable/Disable AVX512.
Options available: Disabled, Enabled, Auto. Default setting is
Auto
.
MONITOR and MWAIT disable
The MONITOR, MWAIT, MONITORX and MWAITX opcodes become invalid
when enabled.
Options available: Enabled, Disabled, Auto. Default setting is
Auto
Small Hammer Configuration
Options available: Disabled, Enabled, Auto. Default setting is
Auto
.
Corrector Branch Predictor
Options available: Disable, Enable. Default setting is
Disable
.
PAUSE Delay
Number a cycles thread will be idle after a PAUSE instruction.
Options available: Auto, Disable, 16 cycles, 32 cycles, 64 cycles, 128
cycles. Default setting is
Auto
.
CPU Speculative Store Modes
Select the CPU speculative store modes.
Options available: Balanced, More Speculative, Less Speculative, Auto.
Default setting is
Auto
.
Summary of Contents for H273-Z81-AAN1
