BIOS Setup
- 158 -
5-6-4
IPv6 BMC Network Configuration
Parameter
Description
IPv6 BMC network configuration
IPv6 BMC Lan Channel 1
IPv6 BMC Lan Option
Enable/Disable IPv6 BMC LAN channel function. When this item is
disabled, the system will not modify any BMC network during BIOS
phase.
Options available: Unspecified, Disable, Enable. Default setting is
Enable
.
IPv6 BMC Lan IP Address
Source
Selects to configure LAN channel parameters statically or dynamically (by
BIOS or BMC).
Options available: Unspecified, Static, Dynamic-Obtained by BMC
running DHCP. Default setting is
Dynamic-Obtained by BMC running
DHCP
.
IPv6 BMC Lan IP Address/
Prefix Length
Check if the IPv6 BMC LAN IP address matches those displayed on the
screen.
Summary of Contents for H273-Z81-AAN1
