background image

- 69 -

BIOS Setup

5-3-4 

Memory Configuration

Parameter

Description

Integrated Memory Controller (iMC)

Enforce POR

When set to Enable, the system enforces Plan Of Record 
restrictions for DDR4 frequency and voltage programming. When 
set to Auto, the system sets it to the MRC default settings.
Options available: Auto/POR/Disable. Default setting is 

Enable

.

Memory Frequency

Configures the memory frequency.

Options available: Auto/2133/2400/2666. Default setting is 

Auto

.

Enable ADR

Enables the detecting and enabling of ADR.
Options available: Enable/Disable. Default setting is 

Enable

.

Legacy ADR Mode

Enable/Disable the Legacy ADR Mode.
Options available: Enable/Disable. Default setting is 

Disable

.

ADR Data Save Mode

Data Save Mode for ADR, Batterybacked or Type 01 NVDIMM.

Options available: Disable/Batterybacked DIMMs/NVDIMMs. 
Default setting is 

NVDIMMs

.

Erase-ARM NVDIMMs

Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable/Disable. Default setting is 

Enable

.

Restore NVDIMMs

Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable/Disable. Default setting is 

Enable

.

Summary of Contents for LGA3647












































































































Reviews: