- 89 -
BIOS Setup
5-4-4
BMC Network Configuration
Parameter
Description
BMC network configuration
Select NCSI and Dedicated
LAN
Switch NCSI and dedicated LAN and send KCS command.
Options available: Do Nothing/Mode1 (Dedicated)/Mode2(NSCI)/Mode3
(Failover).
Default setting is
Mode1 (Dedicated)
.
Lan Channel 1
Configuration Address source
Select to configure LAN channel parameters statically or dynamically
(DHCP). Do nothing option will not modify any BMC network parameters
during BIOS phase.
Options available: Unspecified/Static/DynamicBmcDhcp. Default setting
is
DynamicBmcDhcp
.
Station IP address
Displays IP Address information.
Subnet mask
Displays Subnet Mask information.
Please note that the IP address must be in three digitals, for example,
192.168.000.001.
Router IP address
Displays the Router IP Address information.
Station MAC address
Displays the MAC Address information.
Real-time synchronize BMC
network parameter values
Press [Enter] to synchronize the BMC network parameter values.
Summary of Contents for LGA3647
