Gigabyte M7800S, Manual

Press ID reset button

Execute ID connection software

1

2

3

ID links OK!

4. Replace the new batteries

Please replace a pair of new batteries and follow the previous instructions. (2, 3)

The red LED on the scroll wheel is the low batteries power indicator.  It indicates that 

batteries inside the mouse are needed to be replaced.

Note

While the mouse is working, if encountering any interference, the mouse and the receiver will 

automatically  source  out  and  transfer  to  another  free  channel.    During  the  transferring,  the 

cursor movement may have a second delay.

Note

5. Operation

4-Way Scrolling:

a. Vertical Scrolling

Roll wheel up to scroll up; roll wheel down to scroll down.

b. Horizontal Scrolling

Hold the wheel to left to scroll left; hold the wheel to right to scroll 

right. Release wheel to stop scrolling function.

3. Communication : The mouse & the receiver

The 2.4Ghz RF mouse features a dual-way transmission technology which enables the 

mouse and the receiver auto-communication.

A. Auto-link mode

1. Make sure the Power On-Off Switch on the bottom of the mouse is ON.

2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the 

    mouse and the receiver is auto-linked successfully.

B. Manual mode

If you find the communication channel does not connect well, you can use the software 

connection tool to re-connect the mouse & receiver 

to reset a new channel ID

.   You are 

able to get the software from the included diskette of the package or download from your 

local brand vendor's website. 

◎ 

Trouble Shooting

a. Make sure you have connected the receiver correctly to the computer's USB port.

b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the 

    computer, the computer monitor or external storage drives.

c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The 

    mouse and the receiver

d. If you find the communication channel does not connect well.  You can use the software connection tool to re-connect 

    the mouse & receiver 

to reset a new channel ID

.  You are able to get the software from the included diskette of the 

    package or download from your local brand vendor's website. 

e. Some system devices might conflict with the mouse.  Confirm the IRQ/address settings of these devices for conflicts, 

    and change the settings as required.

f.  Make sure that you are not working the mouse on glossy or reflective surfaces.

◎ 

Battery use reminders

1. Remove worn-out batteries from equipment immediately and dispose of promptly.

2. Keep all batteries (used or new) out of the reach of children.

3. To have the batteries with a regular check and replace new batteries if not used for a long time.

4. Never dispose of batteries in fire, as they could explode.

5. Always replace all the batteries at the same time.  Mixing old and new batteries or mining types (such as alkaline with 

    zinc carbon) will reduce overall performance and could cause leakage or rupture.

6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse.

7. Remove batteries from the electrical device if the device is not going to be used for a long time.

8. If the performance of the batteries decreases substantially, it is time to replace the batteries.

B. Driver Installation

The mouse features plug & play. It is not necessary to install the driver to operate the mouse. 

The driver is an optional item included. However, In order to make the 4-way scrolling 

function effective, you required to install the software driver.

1. Un-install or removing the current mouse driver

    Before installing the driver of the mouse, we suggest that you check if any other mouse 

    driver installed in your system. If yes, in order not to make conflict, please un-install or 

    remove that driver before installing the mouse.

2. Install the mouse 4-Way Scrolling driver

    a.Select setup.exe to install the driver from the CD.

    b.or you can download the 4-Way Scrolling driver from vendor's website.

The 4-Way scrolling function is only effective under successful installation of the 

original mouse driver. The driver is an optional item included in the package or it can 

be downloaded from the website of your local brand vendor.
To function the 4-way scrolling in some applications in Window VISTA such as Word, 

Excel, PowerPoint and etc., the driver should be installed.

Note