background image

- 95 -

BIOS Setup

Parameter

Description

SMU Common Options

Press [Enter] for more options.

 

Š

Determinism Control

 

– Auto = Use the fused determinism, Manual = User can set 

customized determinism.

 

– Options available: Manual/Auto. Default option is 

Manual

.

 

Š

cTDP Control

 

– Auto = Use the fused TDP, Manual = User can set customized 

TDP. TDP is used to define the RC thermal model only.

 

– Options available: Manual/Auto. Default option is 

Manual

.

 

Š

Fan Control

 

Press [Enter] to configure the fan control table.

 

Š

CLD0_VDDP Control

 

– Manual = User can set customized CLD0_VDDP voltage.

 

– Options available: Auto/Manual. Default option is 

Auto

.

 

Š

EfficiencyModeEn

 

– 0 = use performance optimized CCLK DPM settings, 1 = use 

power efficiency optimized CCLK DPM settings.

 

– Options available: Auto/Enabled. Default option is 

Auto

.

 

Š

Package Power Limit Control

 

– Auto = Use the fused PPT, Manual = User can set PPT. PPT will 

be used as the ASIC power limit.

 

– Options available: Manual/Auto. Default option is 

Manual

.

 

Š

xGMI Link Width Control

 

– Auto = Use degault xGMI link width controller, Manual = User can 

set custom xGMI link width controller settings.

 

– Options available: Manual/Auto. Default option is 

Auto

.

 

Š

APBDIS

 

– 0 = not APBDIS (mission mode), 1 = APBDIS.

 

– Options available: 0/1/Auto. Default option is 

Auto

.

 

Š

DF Cstates

 

– Enable or disable DF C-states.

 

– Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

 

Š

CPPC

 

– Enable or disable CPPC.

 

– Options available: Disabled/Enabled/Auto. Default option is 

Auto

.

 

Š

BoostFmaxEn

 

– Auto = Use degault Fmax, Manual = User can set boost Fmax.

 

– Options available: Manual/Auto. Default option is 

Auto

.

Summary of Contents for R282-Z96
















































































































































Reviews: