English
T1000 SERIES USER’S MANUAL
11
1.14 Connecting the AC Adapter
The AC adapter can automatically adjust to any voltage from 100 to
240 volts and outputs power at 12V/19V, allowing you to use your
T1000 computer in almost any region.
CAUTION: Use only the AC adapter and the power cord we
recommend. Using the wrong adapter may damage your computer.
We assume no responsibilities for damages arising from misuse of
AC adapters.
2
3
1
To properly connect the adapter, follow the steps as below:
1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC power port of your computer.
3. Connect the AC adapter power cord to an AC outlet.
1.15 Installing T1000 Device Drivers
If your T1000 netbook already has an operating system installed,
it is best to install all necessary device drivers in order for the
hardware to properly function.
Before installing drivers, check with your vendors to see if they have
already installed all the drivers with the operating system, if not,
please follow the steps below:
1. You can find the Utility Driver CD like the one shown below:
T
Version 3.0
1000
2. Place the CD into external CD RW or DVD RW Drive.An Auto
Run installation screen will appear.
Summary of Contents for T1000 Series
