- 63 -
Configuring a RAID Set
Step 2:
After the system reboot, enter BIOS Setup again. Then enter the
Settings\IO Ports\RAIDXpert2 Configuration
Utility
sub-menu (Figure 3).
Step 3:
On the RAIDXpert2 Configuration Utility screen, press <Enter> on
Array Management
to enter the
Create
Array
screen. Then, select a RAID level (Figure 4). RAID levels supported include RAID 0, RAID 1, and RAID
10 (the selections available depend on the number of the hard drives being installed). Next, press <Enter> on
Select Physical Disks
to enter the
Select Physical Disks
screen.
Figure 3
Figure 4
