GIGAIPC QBiX-JMB-CFLA310H-A1 Startup Manual Download | Manualshive

Page: 13 / 15

background image

13

www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Storage Installation 2 (M2M Storeage)

1. Loosen 4 screws, and then remove the bottom cover
2. Loosen 4 screws to remove the hard disk storage aluminum sheet
3. Loosen the 2 screws to remove the aluminum heat sink and thermal pad.
4. Assemble the M2M (NGFF-2280 SATA) storage hard drive.
5. Install the 2 screws to securely replace the aluminum heat sink and heat sink paste.
6. Install 4 screws to firmly install the hard disk storage aluminum sheet
7. Replace the bottom cover and secure with screws.

«
...
11
12
13
14
15
»

Summary of Contents for QBiX-JMB-CFLA310H-A1
















Reviews:

No comments

Related manuals for QBiX-JMB-CFLA310H-A1

Brand: IBM Pages: 212

9228 - IntelliStation Z - Pro

Brand: IBM Pages: 72

9114-275 - IntelliStation POWER 275

Brand: IBM Pages: 102

8863 - eServer xSeries 366

Brand: IBM Pages: 94

Brand: IBM Pages: 4

Brand: IBM Pages: 84

Brand: IBM Pages: 96

Brand: IBM Pages: 156

Brand: IBM Pages: 178

Brand: IBM Pages: 155

Brand: IBM Pages: 214

Brand: adstec Pages: 68

Brand: Acer Pages: 120

INSPIRON Inspiron 5000

Brand: Dell Pages: 132

Brand: NovaSail Pages: 32

Brand: BiGDUG Pages: 3

Brand: BiGDUG Pages: 4

Brand: Thermaltake Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands