26
System settings
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
System.fm
21.2.02
Step
by
Step
System settings
The abbreviations in brackets after the titles stand for the corresponding ISDN
feature. Some features can only be used if enabled by the provider (additional
charge).
Changing the names for internal subscribers
With the factory default, the names
Int.11
,
Int.12
etc. are allocated to all the in-
ternal numbers in accordance with their numbering. These entries may be
changed to suit your requirements.
G
is pressed for menus.
Press [
Á
] and [OK] to select:
Base Settings
→
Settings
→
Setup user
→
Setup
device
→
(required internal no.)
→
[
W
]
→
Name
.
Change the name and select [
W
] to confirm.
Press [
Á
] and [OK] to select:
Save entry
.
The name is now displayed in the internal list and also when an internal call is
made from this internal no.
Since the names are stored in the base station, another name may be assigned
to a handset when registering with another base station. In this way it is pos-
sible to identify the base station to which the handset is currently connected.
Call waiting - activating/deactivating CW
This feature can be set up separately for each subscriber. When call waiting is
activated, the caller hears the on-hook signal if you are already conducting a
call.
If call waiting is deactivated, the caller hears the ring tone if you are
already conducting a call and additional devices are assigned to this MSN.
If call waiting is deactivated, the caller hears the busy signal if you are aCall
waitinglready conducting a call, and are either the only user assigned this MSN,
or if the feature Busy signal when MSN is engaged (Busy on Busy) see page 27
has been activated.
Press
G
for selection menus.
Select using [
Á
] and [OK]:
Base Settings
→
Settings
→
Setup user
→
Setup de-
vice
→
(required internal subscriber)
→
[
W
]
→
Call waiting
1.
2.
3.
4.
Info
1.
2.
