28
Call beats data
Gigaset 4170/4175isdn, A31008-G4170-B100-2-7619
System.fm
21.2.02
Step
by
Step
Call beats data
If an incoming call is made when the
Call beats data
function is activated and
if both B-channels are seized owing to channel bundling, for example, then a B-
channel is split. The incoming call can be picked up and the Internet connection
is maintained with one channel.
If you have activated the
Call beats data
function while at the same time surfing
the Internet with two separate RDT connections (e.g. with two PCs), one of the
two connections is immediately disconnected in the event of an incoming call.
Factory default:
Call beats data
is not activated.
G
is pressed for menus.
Press [
Á
] and [OK] to select:
Base Settings
→
Settings
→
ISDN settings
→
Call beats data
→
(
9
before menu item = ON / none = OFF).
Configuring music-on-hold
The caller hears music-on-hold when put on hold by the base station rather
than the exchange (e.g. in the case of internal transfer). You should also note
the section on "Setting external/internal enquiry calls" on page 25. The following
settings can be selected:
Press
G
for selection menus.
Select using [
Á
] and [OK]:
Base Settings
→
Settings
→
System settings
→
Music on hold
.
Select using [
Á
] and [OK]: required type.
Info
1.
2.
Internal
The party on hold hears the base station’s music on hold .
External
In this case, the music on hold is played by an external device.
An analog connection must also be configured as external music
on hold. If an analog connection has not been configured, the Ex-
ternal setting (through the analog connection) is not offered.
Please contact your specialist outlet to find out about adapters
for playing music on hold.
Off
If the music on hold is not activated, no settings can be made.
1.
2.
3.