10
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Getting started
Gigaset SL450HX / LHSG IM2 - International en / A31008-M2751-R201-1-SM19 / starting_LHSG_HX.fm / 10/1/15
Charge the battery
¤
Charge the battery fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The battery is fully charged when the power icon
disappears from the display.
Attaching the belt clip
The handset has notches on each side for attaching the belt clip.
•
Attaching the belt clip:
Press the belt clip onto the back of the
handset so that the tabs on the belt clip click into place in the
notches.
•
Removing the belt clip:
Press the centre of the belt clip firmly
with your right thumb.
Push the nail of your left thumb up
between the clip and the casing.
Slide the clip upwards to
remove.
Changing the display language
You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
.
¤
Press the keys
and
slowly
and successively . . . the
language settings display appears, the set language
(e. g.
English
) is highlighted (
= selected).
¤
To select a different language: Press the control key
until
the desired language is highlighted on the display,
e. g.
Francais
press the key on the right directly underneath the display to activate the
language.
¤
To revert to idle status: Press and
hold
the End call key
Registering the handset (depending on the base)
On the base station
3 h
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Deutsch
English
Francais
Registration must be initiated on the base station
and
on the handset.
Both must be carried out
within 60 secs
.
Gigaset base:
¤
Press and
hold
the Registration/Paging key on the base station
(approx. 3 sec.).
Other base station/
router:
¤
Information regarding the registration procedure
Documentation
regarding your base/your router
