background image

25

Using the directory and lists

A58H / USA EN / A31008-M2055-R301-1-6019 / direct_charges.fm / 30.06.2009

Ve

rs

ion 4,

 29

.10.

2007

Last number redial list

The last number redial list contains the ten 

numbers last dialed with the handset 

(max. 32 numbers). If one of the numbers 

is in the directory, the corresponding 

name will be displayed.

Manual last number redial 

Press the display key.

s

Select entry. 

c

Press the Talk key again. The 

number is dialed.

Managing entries in the last number 

redial list

Press the display key.

s

Select entry.

§Menu§

Open menu.

The following functions can be selected 

with 

q

Use Number

 (as in the directory, 

¢

page 24)

Copy to Directory

 

Copy an entry to the directory 

(

¢

page 23).

Delete Entry

 (as in the directory, 

¢

page 24) 

Delete List

 (as in the directory,

 

¢

page 24) 

Opening lists with the 
message key 

An advisory tone sounds as soon as a 

new message

 arrives in a list. The 

f

 key 

flashes (it goes off when the key is 

pressed). In 

idle status

, the display shows 

an icon for the new message.
If you press the message key 

f

, you 

access the lists that contain new mes-

sages.

Þ

Þ

Summary of Contents for A58 H














































Reviews: