Te
mplat
e
M
odu
le
, V
e
rs
ion 1.
3,
1
1
.04.
20
19,
Additional functions
Gigaset CL390HX / LHSG IE-UK-International en / A31008-M2962-R101-1-4N19 / applications_HX.fm / 9/9/19
24
Availability and operation of the functions
may differ on your telephone.
Turning off the wake-up call
A wake-up call is shown on the display and indicated by the ringtone melody selected.
¤
Off
. . . The alarm call is switched off for 24 hours
or
¤
Press
Later
or any key . . .
Snooze
is shown on the display, the alarm call is repeated after five
minutes
Baby monitor (Room monitoring)
When the baby monitor is switched on, the stored external phone numbers or all handsets reg-
istered to the phone (internal) are called as soon as a defined noise level is exceeded in the vicin-
ity of the handset. The alarm to an external number is cancelled after about 90 seconds.
You can answer the alarm using the
Two-Way Talk
function. This function is used to switch the
loudspeaker of the handset located in the baby's room on or off.
In baby monitor mode, incoming calls are only indicated on the display (
without ringtone
). The
display backlight is reduced to 50%. Advisory tones are deactivated. Advisory tones are disabled.
All keys with the exception of the display keys are disabled.
If you accept an incoming call, the baby monitor mode is suspended for the duration of the call,
but the function
remains
activated. The baby monitor mode is not deactivated by switching the
handset off and on again.
The handset should be positioned 1 to 2 metres away from the baby. The microphone
must point towards the baby.
Activating the function reduces the operating time of your handset. For that reason,
place the handset in the charging cradle if necessary.
The baby monitor is activated 20 seconds after switching on.
The answer machine for the destination number must be switched off.
After switching on:
¤
Test sensitivity.
¤
Test the connection, if the alarm is being forwarded to an external number.