Gigaset DA611 / en / A30350-M212-R122-1-UJ19 / telephony.fm / 5/6/19
el
en
es it pt
11
1110-01
Setting the speaker volume
There are seven adjustable levels.
K
¢
Audio setup
¢
Speaker Volume
q
Select the required volume and confirm with
[
.
The current value will be displayed.
Mute
You can mute only the microphone or the speaker and microphone.
K
¢
Audio setup
¢
Mute mode
q
Select the required function and confirm with
[
.
Microphone off:
You are still able to hear the person on
the end of the line, however they cannot hear you.
Micro&Spk. Off
: The telephone is completely muted.
Mute melody
: Whilst in mute mode, the person on the
other end of the line hears a melody.
The set function can also be activated using the mute key during a call
(
Setting the ringer
The following optional settings are available:
¤
Melody and volume
¤
VIP Melody
¤
Switching the ringer off
Setting the melody and volume
You can set the ringer melody and volume or switch the ringer off. There
are 10 different ringers available, the volume can be adjusted in 5 levels
(0=silent).
You can also change both settings directly using the keys while the tele-
phone is ringing (
K
¢
Audio setup
Ring tones
~
Select the required ringer.
D
/
E
Set the volume for the ringer currently selected.
q
Change the ringer playing speed (1 = slow, 3 = fast).
[
Press the control key to save the setting.
Setting the VIP Melody
You can set one of the ringers as
VIP Melody
. When you have assigned a
number from the phonebook
VIP mode
page 8), an incoming
call from this number will be indicated with the
VIP Melody
ring tone.
K
¢
Audio setup
¢
VIP Melody
~
Select the required ringer.
D
/
E
Set the volume for the ringer currently selected.
q
Change the ringer playing speed (1 = slow, 3 = fast).
[
Press the control key to save the setting.
Setting the ring mode
If you do not wish to be disturbed, you can switch off the telephone's
ringer. The three following optional settings are available:
All tones off
,
VIP only
(see above),
All tones on
(default setting).
K
¢
Audio setup
¢
Ringer mode
q
Select the required setting and confirm with
[
.
[
Press the control key to save the setting.
Switching the ring tone off using the key
+
Hold the key down to switch the ring tone off and back on.
Once the ring tone has been switched off, this is indicated with the
k
symbol in the display.
Security settings
Locking the telephone
You can secure your telephone against unauthorised access by using the
Key lock.
Setting up the Key lock
When the Key lock is activated, all keys are locked, with the exception of
the hands-free key and the stored emergency numbers (
Activating the Key lock
$
When the telephone is on stand-by, press and
hold down
the lock key.
or
K
¢
Security
¢
Key lock
Deactivating the Key lock
$
Hold down
the lock key.
Once the key lock has been switched on, this is indicated with the
i
symbol and
Key locked
in the display.
Emergency calls
There are two emergency numbers stored in the telephone as a default
setting (110, 112). You can store an additional emergency number with
a max. of 28 digits. These emergency numbers can also be selected
when the Key lock is switched on.
Hinweis
Instead of using the
q
key you can also use the
D
/
E
keys.
Note
The melodies are played over the speaker if you lift the handset
before commencing with the settings.
Q
...
O
Ringer 1 - 10
Note
The ring melody can only sound perfectly when the ring pulse arrives
from the telephone network. The length of the pulses may differ from
network to network. It is therefore possible that some ring tones for
selection may seem clipped. If this is the case please select another
ring tone.
Q
...
O
Ringer 1 - 10
