10
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Getting started
Gigaset GS170 / LUG International en / A31008-N1502-R101-1-7619 / starting.fm / 8/4/17
Closing the cover
¤
Align the cover with the side tabs on the slots on the inside of the casing.
¤
Press the cover until it clicks into place.
Charging the battery
¤
Plug the Micro-USB connector of the charger cable
provided into the Micro-USB socket of the
smartphone
¤
Connect the power adapter to the USB connector of
the charger cable and connect it to the power source.
The Message LED lights red during the charging process
(
p. 3). The device is charged once the Message LED
lights green and the charge icon
in the Status bar is
filled completely.
Switching on the device
¤
Keep the On/Off button pressed until the device vibrates.
When you are requested to unlock the SIM card,
¤
use the keypad to enter the PIN of the SIM card
When switching on the device for the first time, a wizard starts which guides you through the
initial configuration.
Wizard for configuring the device
When you switch on your phone for the first time, you are automatically guided through the
most important configuration steps.
Selecting the language
The set language is displayed.
¤
Select another language as required tap
So your phone does not discharge during set-up, keeping it connected to the power
is recommended until set-up is complete.
<
Back: Check and change as required settings already configured.
Next >
Apply the setting on the screen and jump to the next screen.
Skip
Configure the setting later.