53
Gigaset GS170 / LUG International en / A31008-N1502-R101-1-7619 / settings.fm / 8/4/17
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Security
Colour inversion
Swapping of colour values. For example, black text on a white screen becomes white text on
a black screen.
Colour correction
Compensate the effects of colour blindness.
More information on accessibility features is available from:
Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time after the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
Setting up a display lock
Settings
Users
–
Security
Screen lock
Enter the PIN, pattern or password if
you have already specified a lock
Select the method . . .
Pattern
,
PIN
,
Password
¤
Select option
Require pattern to start device
if the requirement is for the device to prompt
unlocking at the start
Continue
For
Pattern
:
¤
Draw the pattern - join together at least four dots
Continue
Repeat the pattern
Confirm
For
PIN
:
¤
Enter at least four letters or digits
Continue
Repeat the PIN
OK
For
Password
:
¤
Enter at least four letters or digits
Continue
Repeat the password
OK
Settings for the display lock
¤
Settings
Personal
–
Security
Tap
next to
Screen lock
Make the setting
It is also possible to use a fingerprint as a display lock ( p. 27). In this case, the
display lock set up serves as the alternative method.
Setting up a display lock when getting started ( p. 12).
None
. . . No security
Swipe
. . . The display can be unlocked by swiping over the screen