7
Introduction
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / introduction.fm / 06.02.2012
V
e
rsion 2, 06.0
8
.2010
u
Gigaset handsets
– Up to 100 handsets can be connected and 30 DECT connections can be made
simultaneously (calls, eMail checks, connections to online directories and the Info
Centre).
The following handsets are recommended: Gigaset SL610H PRO, SL400H, S810H,
E49H.
Further information relating to the functions of the handsets in connection with
the Gigaset base stations can be found in the
section (
and on the
Service
page at www.gigaset.com/pro/gigasetn720 on the Internet.
– Subscribers can accept or initiate calls in all DECT cells with their handset
), and can also switch between the DECT cells during a call (
).
A handover is only possible within the same cluster.
Configuring handsets
u
PABX
You can connect your DECT telephone system to a PABX for VoIP, ISDN or analogue
telephony, e.g.,
– A Gigaset T500 PRO or T300 PRO
– A PABX from another manufacturer
– A PABX over the Internet (hosted PBX)
The PABX
– Establishes the connection to a public telephone network
– Enables central management of telephone connections, directories, network
mailboxes
u
Forming clusters with the Gigaset N720 DECT IP Multicell System
You can divide DECT base stations that you have installed at your location into several
independent groups, i.e., clusters, and manage them using one Gigaset N720 DM PRO
DECT Manager (
This means DECT domains that are a long way apart can be managed from a central
point. The DECT Manager is connected to the base stations and the PABX via the local
network and is therefore not dependent on DECT ranges. It guarantees access to the
centrally configured IP connections, directories etc. However, a handover of handsets
between clusters is not possible.
