67
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / web-conf.fm / 06.02.2012
V
e
rsion 2, 06.0
8
.2010
Prioritising VLANs
Data packets from VLANs can be prioritised. The priority determines whether the data
traffic from a VLAN is given preferential treatment by the network components. You can
define the priority for voice and data separately. In the case of a local network with a lot
of data traffic, you can achieve better quality phone connections by giving a high priority
to voice data.
Range of values and assignment of values to service classes (according to IEEE 802.1p):
Saving settings
¤
Click on
Set
to save your settings on the
IP Configuration
page.
Configuring and synchronising base stations
The Gigaset N720 DECT IP Multicell System automatically recognises the base stations,
but they need to be confirmed, activated and synchronised.
To do this you will need a list of all base stations, each with the MAC address of a DECT
module and the location in the building or a unique name for the cell. You will find the
MAC addresses for the DECT modules on the sticker attached to each respective Gigaset
N720 IP PRO base station.
Registering base stations
Settings
¢
Network and connectors
¢
Base station registration
The window shows a list of all DECT base stations connected to the network which have
not yet been registered. The base stations are identified by their MAC address and by the
date and time of their initial contact with the system.
If there are no base stations on the local network that have not yet been registered, a
message to this effect will be displayed.
¤
Select
Confirm
if this base station is to be registered to the system.
0
No priority (Best Effort)
1
Background services, e.g., news ticker (Background)
2
Not defined
3
General data services (Excellent Effort)
4
Control services, e.g., routing (Controlled Load)
5
Video
6
Voice data (Voice)
7
Top priority for network control software (Network Control)
