68
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-2-7619 / web-conf.fm / 06.02.2012
V
e
rsion 2, 06.0
8
.2010
The
Own base station data
window opens to configure this base station.
¤
Enter a unique identifier for the base station in the
Name / location
field (e.g., Ground
Floor West). This name should make it easier to assign the base station within the
logical and spatial structure of the DECT network.
¤
DECT-Cluster
and
Synchronisation level
can be specified later on the
page.
The base station status is displayed:
–
Offline
: The base station is not connected to the telephone system via LAN.
– Deactivated
– Active
– Active and Synced
The IP address type is copied from the setting for the DECT Manager on the
IP Configuration
page (
). You can change the IP address type. The settings for the DECT Manager
and the base stations do not have to match. For example, the DECT Manager could receive a
fixed IP address so that it will always be able to access the Web configurator with the same
address, while the base stations receive their IP addresses dynamically.