25
Using several handsets
Gigaset S455 / USA EN / A31008-M1714-R301-3-6019 / registr_sett.fm / 21.8.07
Using several handsets
Registering handsets
You can register up to a total of six hand-
sets on your base station.
A Gigaset S45 handset can be registered
on up to four base stations.
Automatic registration Gigaset S45 to
Gigaset S450
Important
: The handset must not yet be
registered to any base station.
Registering the handset to the Gigaset
S455 base station occurs automatically.
¤
Place the handset in the base with its
display facing forward
.
Registration takes around 1 minute. Dur-
ing this process,
Regstr.Procedure
appears
in the display and the name of the base
station flashes, for example
Base 1
. When
the handset has been registered, its
screen displays its internal number, for
example
INT 2
for internal number 2. The
handset is assigned the lowest available
internal number (1-6). If all internal num-
bers 1-6 have been assigned, number 6 is
overwritten, assuming that the handset
with the internal number 6 is in idle sta-
tus.
Manual registration Gigaset S45 to
Gigaset S455
You must activate manual registration of
the handset at both the handset and the
base station.
After it has been registered, the handset
returns to idle status. The internal number
of the handset appears in the display, for
example
INT 1
. If it does not, repeat the
procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s
Select base station, for exam-
ple
Base 1
and press
§OK§
.
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
. The
screen will display the
number, for example
Base
1
.
On the base station
Within 60 secs. press and
hold
the regis-
tration/paging key on the base station
(page 2) (approx. 3 secs.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in the user guide for this par-
ticular handset.
On the base station
¤
Press and
hold
the registration/paging
key on the base station (page 2)
(approx. 3 secs.).
Note:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset