9
Gigaset S850 / LUG IM-Ost en / A31008-M2605-R601-1-TK19 / starting.fm / 1/8/15
Te
mplat
e
G
o
, V
e
rs
ion 1
, 01.
07
.2
014
/ M
odu
leV
e
rs
ion 1
.0
Getting started
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and to
enable the alarm to be used.
¤
Press the display key
Time
or, if the date and time have already been set:
¤
. . . use
to select
Settings
OK Date/
Time
OK
The active cursor position flashes . . . change cursor position
with
. . . switch between cursor positions with
Enter date:
¤
. . . enter the day, month and year in 8-digit format with
,
e. g.
for 15/08/2014.
Enter time:
¤
. . . enter hours and minutes in 4-digit format with
,
e. g.
for 07:15 .
To save settings:
¤
Press the display key
Save
. . . . the message
Saved
is shown in
the display and you hear a confirmation tone
Returning to idle status:
¤
Press and
hold
the End call key
The telephone is now ready for use.
Connecting the headset
¤
Connect the headset with 2.5 mm jack to the left side of the
handset .
For information on recommended headsets, see the relevant
product page at www.gigaset.com/s850.
The headset volume corresponds with the setting for the receiver
volume (
p. 57).
Connecting the USB data cable
For data exchange between the handset and PC:
¤
Connect the USB data cable with micro-USB plug into the
USB socket at the bottom of the handset
.
Connect the handset
directly
to the PC,
not
via a
USB hub.
Calls
Time
Date/Time
Date:
15/08/2014
Time:
00:00
Back
Save
1
1
1
1