7
To setup the Gigaset® device, you must first configure your computer to obtain an IP address
from a DHCP server. Use the procedure below that corresponds to your system's operating
system.
Option B > Configure the Macintosh
Configuring OSX
1. Click
Apple > Preferences
.
2. Select the
Network
icon under the
Internet & Network
section.
3. Select
Built-in Ethernet
from the
Show
drop-down menu.
4. Select
Using DHCP Server
from the
Configure IPv4
drop-down menu
.
5. Click Apply Now and exit the
System
Preferences
window.
6. Configure the Gateway using the
steps that follow.
1. Click
Apple > Control Panels > TCP/IP
.
2. Select
Ethernet
from the
Connect via
drop-down menu.
3. Select
Using DHCP Server
from the
Configure
drop-down menu
.
4. Close the window and save the
changes.
5. Configure the Gateway using the
steps that follow.
Configuring OS9
Step 4 > Configure the Gateway
Windows ME and XP users: If you have Universal Plug and Play (UPnP) enabled,
Windows may detect the Gigaset device upon startup and provide a shortcut to the
device on the desktop. The icon will be labeled
Residential Gateway.
Double-click the icon and skip to step 3.
If your PC has not been connected to a broadband modem or other network device,
perform the PC configuration procedure below. Remember to restart each PC when finished.
1. Start your Web Browser.
2. In the address bar, type http://gigaset, then press Enter. The Gateway Setup Wizard
appears to guide you through the setup process.
3. When you have completed the Gateway Setup Wizard, you can connect to the Internet or
configure additional options on the Gateway.
Congratulations!
You have completed installing your Gigaset device.
007_se01_001_print.qxd 26.02.2007 10:34 Seite 7
A31008-M9207-R101-1-7619
