Owner’s Manual
MODEL # MM006 / Battalion Barracks Mini Tent
Dimensions: 19.5” x 19.5” x 21”
WASHING & CARE INFORMATION
Hand wash using a mild dishwashing soap and soft
sponge, then allow the fabric to completely air dry. To
prevent mold or mildew do not store wet or damp.
WARNING:
Keep all flame and heat away from tent and tent fabric.
This tent meets flammability requirements of CPIA -84 .
THIS TENT IS NOT FIRE PROOF.
IF LEFT IN OPEN FLAME THE TENT WILL BURN.
CAUTION:
Never use any fuel-burning or oxygen-consuming
devices, or any devices that produce fumes, including
stoves, lanterns, candles, hibachis or heaters in or
around your tent. This can result in carbon monoxide
poisoning, injury or death
NOTE:
This tent meets the
state California’s
requirement of
Prop-65.
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
1-877-836-8701
For questions or concerns call Gigatent at our
Toll Free Number: 877-836-8701
Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST
or email us at customerservice@gigatent.com
For replacement parts login to http://www.gigatent.com/replacement-parts/
DESCRIPTION QTY.
POP UP TENT
100% Polyester
1
ASSEMBLY INSTRUCTIONS
DISASSEMBLY INSTRUCTIONS
STEP 1:
Confirm product contents by emptying contents of bag(s)
and confirming all parts are included and undamaged.
STEP 2:
Select a smooth level area to open the play set.
STEP 3:
Pull tent frame apart to pop open tent.
CAUTION:
Tent has inner steel wire which may spring open suddenly
while attempting to assemble tent.
TIP: Frame may need minor adjustment when tent is set up. Gently bend
frame into shape if sagging appears.
STEP 1:
Pick up the tent and lay it on its side.
STEP 2:
Grasp corner frame and push INTO the structure towards the
OPPOSITE corner.
STEP 3:
The structure will now fold flat.
STEP 4:
Grasp 2 DIAGONALLY OPPOSITE corners and bring them together in
one hand. (You now have a loop above and below your hand)
STEP 5:
Grasp the outer edge of the top loop furthest away from you and fold
inward toward the lower loop and lay flat on the ground. (You now
have 2 loops on top of a larger one)
STEP 6:
Slide one of the smaller loops over the one next to it and grasp the
outside edges of the entire folded play tent.
STEP 7:
Slowly move your hands around the outside edges to make all of the
loops the same size.
STEP 8 :
Place folded structure into carry case.
CAUTION:
This product was not designed to be left out
in the sunlight for extended periods of time.
Prolonged UV exposure will rapidly break
down the fabric of this product. UV damage
is not covered under our warranty
STYLE #:MM-006
