Intermec CN3 Handheld Information
5
APPENDIX 2
Reboot Terminal
Re-Boot Terminal:
Rarely does the CN3 require resetting, but it if does not respond properly, it reset may be necessary.
Perform a warm boot first and see if that fixes the problem. If it does not, then perform a cold boot.
Warm Boot the Handheld (Preferred Reset Method)
Press and hold the
Power
button for about 10 seconds. The unit screen will systematically shut
down, restart and go through the initialization process.
Cold Boot the Handheld (Secondary Reset Method)
Cold booting is only recommended if the computer completely stops responding. Cold booting the
CN3 may result in data loss. Configuration and network settings will be preserved.
To Cold Boot, press the
Power
button to suspend the terminal.
Remove the battery pack.
Use the stylus to press the Reset button on the back of the CN3.
Replace the battery and the CN3 will cold boot:
When Cold Boot is complete, the Today screen will appear.
Set the date and time after each cold boot to ensure that the system clock is accurate.