Intermec CN3 Handheld Information
8
3- Select a Profile for Security.
1) From the Homescreen, Select:
Start > Settings > System > Intermec Settings >
Communications > 802.11 Radio > Funk Security
2) Select
Active Profile,
choose a profile from the list and save your settings.
3) Tap on the active profile to expand it.
4) Give the profile a meaningful name:
Select the Profile Label and a text box appears
Select the text in the box, type in a name, save your settings
5) Select one profile as the active profile by tapping
Active Profile
and choosing the
profile from the drop-down list.
6) Save your settings. Exit to the Homescreen.
4
- Configure Security (WPA or WPA2 in this example).
1) From the Homescreen, Select:
Start > Settings > System > Intermec Settings >
Communications > 802.11 Radio > Funk Security > Profile
2) For
Association, c
hoose
WPA
or
WPA2,
press
Enter
Encryption automatically defaults to TKIP if using WPA.
WPA2
uses
AES.
3)
For
8021x
, choose
None
.
4) For Pre-Shared Key,
enter the pre-shared key or passphrase
.
Pre-shared key may be given in hexadecimal by
prefixing a string of 64
Hex
digits
with
0x
for a total of 66 characters,
or
by entering a passphrase of
(of your choosing) that is 8 to 63 characters.
5) Save your settings.
(The CN3 is capable of supporting other wireless security options. If your
network uses other security, reference the CK32 Users Manual. The manual is
available,
online,
from
www.intermec.com
and located under “Support” >
“Manuals”
