Page 2 MDE-3882B Conversion of the Universal Distribution Box [D-Box (PA0261XXXXXXX)]: RS-422 to Two-wire and Two-wire to RS-422 · November 2015
Introduction
Parts List
Following tables list the parts included in the Conversion Kits:
Item
Description
Part Number
Quantity
1
Assembly, Cable Two-wire J905/J102 D-Box
R18810-G1
2
2
Cable, Work Area
Q13850-100
2
3
Gender Mender Assembly, Modular Jack to D-Subminiature (D-Sub) Q13180-11B
2
4
Assembly, Screw Lock (Connector D-Sub)
Q10437-07
4
Conversion Kit Q13241-107
Item
Description
Part Number Quantity
1
Assembly, Cable Two-wire J905/J102 D-Box
R18810-G1
2
2
Cable, Work Area
Q13850-100
2
3
Gender Mender Assembly, Modular Jack to D-Sub
Q13180-11B
2
4
Assembly, Screw Lock (Connector D-Sub)
Q10437-07
4
5
Cables, PC
Q13240-09
1
Conversion Kit Q13241-118
Required Reading
Where fuels are involved, you are working in a dangerous environment of gasoline,
gasoline vapor, and electricity. Failure to install this equipment in accordance with
National Fire Protection Association (NFPA) 30A and NFPA 70
®
could result in severe
injury or death.
WARNING
Before installing the kits, read, understand, and follow:
•This manual.
•The National Electrical Code [NEC
®
(NFPA 70)].
•The automotive and marine service code (NFPA 30A).
•Any national, state, and local codes that may apply.
Failure to install the equipment in accordance with NFPA 30A and NFPA 70 may
adversely affect the safe use and operation of the system.