Attaching the Canopy Bracket [M00780B001PB0 (For Encore Units Only)]
MDE-2636D Canopy Kits (K35496 and K35498) for The Advantage® Series and Canopy Kit (K96632-02) for Encore® · September 2012
Page 9
Attaching the Canopy Bracket [M00780B001PB0 (For
Encore Units Only)]
The Canopy Bracket (M00780B001PB0) for Encore Units is as shown in
Figure 4: Canopy Bracket (M00780B001PB0) - Encore Units Only
Canopy Bracket
(M00780B001PB0)
Hex Bolt
(M01115B004)
Flat Washer (M00959B010)
Lock Washer (M01020B001)
To attach one Canopy Bracket (M00780B001PB0) to the panel, proceed as follows:
1
Install the Lock Washer (M01020B001) and then the Flat Washer (M00959B010) on the Hex
Bolt (M01115B004).
2
Insert the Hex Bolt (M01115B004) end through the panel mounting hole and then through the
hole into the Canopy Bracket (M00780B001PB0).
3
Thread the Hex Bolt (M01115B004) securely into the Canopy Bracket (M00780B001PB0).