MDE-4771H Encore® S Enhanced FlexPay™ EMV® CRIND® Start-up/Service Manual · November 2019
Page 4-5
Replacing and Activating FlexPay EMV CRIND
Service
6
Provide the unit serial number and challenge number to receive a matching password.
Note: To obtain a password, call the Gilbarco Call Center at 1-800-800-7498, and state that
you have a FlexPay EMV CRIND that requires activation.
7
Enter the matching password into the Security Setup Menu and press
OK
. After you enter the
password correctly, the system will show the sensors’ status and three options.
Option
Description
1
UNIT ACTIVATION (to activate the unit)
OK
SAVE CHANGES AND EXIT
CANCEL
UNDO ALL CHANGES AND EXIT
Figure 4-8: Security Setup Menu - Options Screen
8
Press
1
to activate the unit. The message, “ALL DISMOUNTING SENSORS ENABLED
UNIT ACTIVATED” is displayed. Press
OK
to exit the menu and press
CANCEL
to restart
the FlexPay EMV CRIND.
Figure 4-9: Activation Screen
Activation will enable all the connected secure modules.
Note: It is not possible to enable only one component and retain the other components in an
inactive state.
