background image

Secured Socket Layer (SSL) Software License

OpenSSL License

Page C-2                                                    MDE-4771H Encore® S Enhanced FlexPay™ EMV® CRIND® Start-up/Service Manual · November 2019

Original SSLeay License

Copyright

©

 1995-1998 Eric Young (

eay@cryptsoft.com

). All rights reserved. This package is 

an SSL implementation written by Eric Young (

eay@cryptsoft.com

). The implementation was 

written so as to conform with Netscapes SSL. This library is free for commercial and 

non-commercial use as long as the following conditions are adhered to. The following 
conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, and so 
on, code; not just the SSL code. The SSL documentation included with this distribution is 
covered by the same copyright terms except that the holder is Tim Hudson 
(

tjh@cryptsoft.com

).

Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the 
author of the parts of the library used. This can be in the form of a textual message at program 
startup or in documentation (online or textual) provided with the package. Redistribution and 
use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met:

1

Redistributions of source code must retain the copyright notice, this list of conditions and the 
following disclaimer.

2

Redistributions in binary form must reproduce the above copyright notice, this list of 
conditions and the following disclaimer in the documentation and/or other materials provided 
with the distribution.

3

All advertising materials mentioning features or use of this software must display the 
following acknowledgement: “This product includes cryptographic software written by Eric 
Young (

eay@cryptsoft.com

)”. The word “cryptographic” can be left out if the routines from 

the library being used are not cryptographic related.

4

If you include any Windows specific code (or a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement: “This product includes software 
written by Tim Hudson (

tjh@cryptsoft.com

)”. 

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.

The licence and distribution terms for any publically available version or derivative of this 
code cannot be changed, that is this code cannot simply be copied and put under another 
distribution licence including the GNU Public Licence.

Summary of Contents for Veeder-Root Encore S Enhanced FlexPay EMV CRING



























































Reviews: